![Dodge Monaco 1975 1976 1977 1978 Rear View Mirror](https://s.turbifycdn.com/aah/yhst-172566752-9/dodge-monaco-1975-1976-1977-1978-rear-view-mirror-9.png)
![Zoom](https://s.turbifycdn.com/aah/yhst-172566752-9/chevrolet-kodiak-c4500-2008-driver-side-mirror-glass-13.png)
Dodge Monaco 1975 1976 1977 1978 Rear View Mirror
[ Dodge Monaco 1975 1976 1977 1978 75 76 77 78 Rear View Mirror Replacement ]
LENGTH: 11.5"
This is a brand new rear view mirror for your OEM replacement.
It comes with a mounting bracket, primer and glue for mounting.
THIS IS A BRAND NEW REAR VIEW MIRROR FITTING Dodge Monaco 1975 1976 1977 1978 Rear View Mirror
INSTALLATION INSTRUCTION
1.Remove old adhesive (if any) completely. This can be done using a razor blade to scrape any debris off the surface.
2.Clean glass and mounting bracket/button thoroughly
3.Apply primer to glass
4.Apply 1-2 drops of adhesive to the mounting bracket/button
5.place the mounting bracket/button onto glass and hold in place for 30-40 seconds.
6.Attach the mirror onto the bracket.
Tip: Incase your old bracket is still on the glass, to remove it:-
1.Using a hand held lighter, heat the bracket directly on it.
2.Grasp the bracket using a pliers and twist side ways (to the left and right not upward) as you are heating until the bracket comes off.
ANY QUESTIONS, PLEASE CALL
LENGTH: 11.5"
This is a brand new rear view mirror for your OEM replacement.
It comes with a mounting bracket, primer and glue for mounting.
THIS IS A BRAND NEW REAR VIEW MIRROR FITTING Dodge Monaco 1975 1976 1977 1978 Rear View Mirror
INSTALLATION INSTRUCTION
1.Remove old adhesive (if any) completely. This can be done using a razor blade to scrape any debris off the surface.
2.Clean glass and mounting bracket/button thoroughly
3.Apply primer to glass
4.Apply 1-2 drops of adhesive to the mounting bracket/button
5.place the mounting bracket/button onto glass and hold in place for 30-40 seconds.
6.Attach the mirror onto the bracket.
Tip: Incase your old bracket is still on the glass, to remove it:-
1.Using a hand held lighter, heat the bracket directly on it.
2.Grasp the bracket using a pliers and twist side ways (to the left and right not upward) as you are heating until the bracket comes off.
ANY QUESTIONS, PLEASE CALL